Fuel Filter / Water Speparator

R12T Fuel Water Separator Filter Universal

Water/Fuel Separating Filter

Water separator and filter kit comprising of an aluminium head with 10 micron filter and UV resistant clear polyamide drainage bowl and plastic drain plug. The top has an integral mounting bracket.

1 x This spin-on filter design is simple to replace and the reusable clear nylon collection bowl and features a self-venting drain for removing unwanted muck and water.

Notice: This a separator for Diesel & Water, It could not be for Petrol & Water separator, R12T Fuel Filter Water Separator 120AT NPT ZG1/4-19 with Fitting Complete Filter Assy

Filter is designed for high performance applications, and with flow rate of 30 GPH on the R12T model, your engine will perform better than ever with clean, water-free fuel. Don't be caught in the water without one of these diesels spin-on filters

Fuel Water Separating Filter fit 3/8 Inch NPT Outboard Motors as well, 10-micron filters are over 90% efficient at removing particles as small as 10 microns. 10-micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems.

Designed to trap the smallest particles and emulsified water from fuel

The filter units are coated with a powder coating for superior corrosion resistance,

Instructions:

1.Nylon collection bowl down when installed the water separator and filter.

 2.This filter has four ports, two inputs and two outputs. If only One output is needed  please use the blanking plugs provided the extra ports.

3. When installing the filter, please use a Teflon-tape to ensure a tight seal.

Write a review